Facilities

#1 - Batch Operation

Size capability: 10 × 24 × 7 (L×W×H, feet)
Pretreatment: Two stage spray wand phosphatizing and degreasing.; Wash bay size: 25 × 12 (feet)
Media blasting (glass and aluminum oxide): Booth size: 12 × 12 × 7 (feet)
Heat (metal and cast degassing): Oven #1: 32 × 32 × 18 (L×W×H, inches); Oven #2: 75 × 96 × 87 (L×W×H, inches); Temperature capacity: 850°F
Powder Booth (manual batch): Sizes range from 14 × 10 to 34 × 10 (feet)
Powder Application Equipment: Wagner lontech
Cure Oven (convection): Oven #1: 20 × 8 × 7 (L×W×H, feet); Oven #2: 24 × 10 × 7 (L×W×H, feet); Temperature capacity: 500°F
Stripping: Thermal, aluminum oxide, media blasting, glass media blasting, chemical

Pretreatment (Three stage inline washer): 1: Heated cleaner iron phosphate; 2: Rinse (ambient); 3: Heated R/O rinse or seal rinse
Drying: Single pass inline convection oven
Powder Booth: Wagner reclaim/cymod
Powder Application Equipment: Four Wagner automatics on reciprocators and two manual touch up guns
Cure Oven: Inline single pass convection oven
Line information:: Part size capability ranges from ¼in × ¼in to 12ft × 2ft × 4ft 6in; Line speed is 3 to 8 feet per minute
Types of metal coated: Hot and cold rolled steel, aluminum, aluminum alloy, cast aluminum iron, cast iron, brass, stainless, etc.

Pretreatment (3-stage inline washer): 1: Heated cleaner iron phosphate; 2: Rinse (ambient); 3: Heated R/O rinse or seal rinse
Drying: Single pass inline convection oven
Powder Booth: Wagner reclaim cartridge/cymod
Powder Application Equipment: Six Wagner automatics on reciprocators; Two manual touch up guns
Cure Oven: Three pass convection oven
Line information: Part size capability ranges from ¼in × ¼in to 8ft × 2ft × 6in; Line speed is 3 to 8 feet per minute
Types of metal coated: Hot and cold rolled steel, aluminum, aluminum alloy, cast aluminum iron, cast iron, brass, stainless, etc.